- To inject resin with viscosity till 1.000 cps (centipoises).

- Electronically variable flow between 3 and 20 litres/ minutes on a visual screen display.

- Selectable injection pressure between 0,5 and 12 bar through electronic control; 0,1 bar precision on a visual screen display.

- Injection control remote selector:
A) “Maintaining Pressure”. The machine injects till to its selector pressure then it stops, turning on if the pressure decreases. In this way the machine will be injecting till the leak will not be sealed at its totally.
B) “Stop pressure”. When it reaches the selector pressure, the injection will stop.

- Resin deposit of 20 litres with filter and lid. The deposit will be easily removed from the machine for an exhaustive cleanliness.

- Electric component box with two lockable doors in order to protect its remote control. The external one is transparent so we could control the machine without opening the door.

- 220V single- phase working pressure, and 24 V maneuvering of high safety for its operator.
Absorbed power: 2000 watts.

- Yellow polyester painting at the furnace of high resistance.

- Only one maintenance: Cleaning after every single use.

- Injector nozzle with antireturn safety valve.

- Disposable and cheap.